QO100 next steps…

As I said before I want to use an actual transceiver for QO100 work rather than the Pluto. A precursor to that is a 2400MHz transmit capability and so I now have a nice new (used, new to me) SG Labs 13cm transverter, complete with the PCB log periodic antenna. It is already set up for the correct frequency range and seems fine… so, the next step is move the dish, clear the loft in that area, and get the kit up there. The transverter claims to put out 2W so I can use the existing AMSAT UK PA via an attenuator (max input is 200mW) which should get me 4 to 5W to the dish and has been adequate in the past when using the Pluto. I will first try with just the ‘raw’ 2W and see if I can get into the satellite. The eventual aim is to use an 80W PA I have ready so I can use DATV as well as SSB or digimodes – that also takes 200mW input – but as yet I don’t have a suitable PSU.



Recent Posts